Lightning Bolt is capable of manufacturing a wide range of Nitronic-60 fasteners, including Nitronic-60 Studs. Nitronic-60 Studs are made of a fully austenitic alloy that was originally designed as a temperature alloy, and subsequently has good high temperature properties for temperatures around 1800ºF. The oxidation resistance of Nitronic 60 is similar to Type 309 S.S., and far superior to Type 304S.S. This grade is best known for its wear and galling resistance. The additions of Silicon and Manganese have given this alloy a matrix to inhibit wear, galling, and fretting even in the annealed condition. Higher strengths are attainable through cold working the material and is still fully austenitic after severe cold-working. This working does not enhance the anti-galling properties as is normal for carbon steels and some stainless steels. The benefit to the cold or hot work put into the material is added strength and hardness, and the wear resistance does not decrease noticeably. Chromium and Nickel additions give it comparable corrosion to 304 and 316 stainless steels, while having approximately twice the yield strength. The high mechanical strength in annealed parts permits use of reduced cross sections for weight, and cost reductions through the use of thinner stock. The corrosion resistance of NITRONIC 60 Stainless Steel falls between that of types 304 and 316. However, experience shows that in a wear system, a galling or siezure failure occurs first, followed by dimensional loss due to wear, and finally corrosion. Galling and wear must be the first concerns of the design engineer. Although the general corrosion resistance of NITRONIC 60 is not quite as good as Type 316, it does offer better chloride pitting resistance, stress corrosion cracking resistance and crevice corrosion resistance than Type 316 in laboratory conditions. Corrosion tests are not normally performed Fastener galling – capable of frequent assembly and disassembly, allowing more use of the fastener before the threads are torn up, also helps to eliminate corroded or frozen fasteners. Being an ISO 9001:2008 certified company, we are capable of manufacturing any type of fastener.
Special alloy fasteners are our “specialty,” however standard items also within our capabilities include:
Why Lightning Bolt for Nitronic-60 Studs?
Lightning Bolt & Supply has been servicing North America’s industrial fastener needs for over 25 years. Since then, our focus on the production of high quality parts at competitive pricing has allowed us to become an industry leader. Our niche in exotic high nickel alloy fasteners include materials such as: hastelloy, Inconel, monel, A-286, 904L, Alloy-20, duplex stainless as well as many additional alloys.
Being centrally headquartered in Baton Rouge, Louisiana, we are capable of shipping to jobsites all over the world. Many of our industrial projects that we supply material to include anchor bolts, and also stud bolts of many different ASTM grades. These include B7, L7, B16, B8, B8M, stain hardened and many more. In addition to being an ISO certified fastener manufacturer, we were awarded “Corporate Supplier of the Year” by WBENC.
To learn more about our products, or to place an order, please call (225) 272-6200 or send an email to firstname.lastname@example.org. For calls placed from outside of the United States, please call 001-225-272-6200.
Contact usOur Team will contact you in less than 24 hours
Stud Flange Chart Download