Lightning Bolt is capable of manufacturing a wide range of Alloy-60 bolts. It’s resistance to corrosion is sometimes compared to between that of 304 & 316 stainless steel. However, this alloy is used favored in application (ie. Use in semiconductors) for having a yield strength nearly double that of commercial grade stainless steel, but also for their ability to be resistant to galling. It is this inherent property that makes it favored by many that require anti-corrosion properties of stainless, but without the headache.
The additions of Silicon and Manganese have given this alloy a matrix to inhibit wear, galling, and fretting even in the annealed condition. Higher strengths are attainable through cold working the material and is still fully austenitic after severe cold-working. This working does not enhance the anti-galling properties as is normal for carbon steels and some stainless steels.
The benefit to the cold or hot work put into the material is added strength and hardness, and the wear resistance does not decrease noticeably. Chromium and Nickel additions give it comparable corrosion to 304 and 316 stainless steels, while having approximately twice the yield strength. The high mechanical strength in annealed parts permits use of reduced cross sections for weight, and cost reductions through the use of thinner stock.
Alloy 60 bolts are also referred to as Nitronic 60 bolts.
Special alloy fasteners are our “specialty”, however standard items also within our capabilities include:
- ALLOY-60 Nuts
- ALLOY-60 Washers
- ALLOY-60 Screws
- ALLOY-60 Socket Cap Screws
- ALLOY-60 Studs
- ALLOY-60 U-bolts
- ALLOY-60 Hex Bolts
- ALLOY-60 Hex Cap Screws
Why Lightning Bolt for ALLOY-60 Bolts?
Lightning Bolt & Supply has been servicing North America’s industrial fastener needs for over 25 years. Since then, our focus on the production of high quality parts at competitive pricing has allowed us to become an industry leader. Our niche in exotic high nickel alloy fasteners include materials such as: hastelloy, Inconel, monel, A-286, 904L, Alloy-20, duplex stainless as well as many additional alloys.
Being centrally headquartered in Baton Rouge, Louisiana, we are capable of shipping to jobsites all over the world. Many of our industrial projects that we supply material to include anchor bolts, and also stud bolts of many different ASTM grades. These include B7, L7, B16, B8, B8M, stain hardened and many more. In addition to being an ISO certified fastener manufacturer, we were awarded “Corporate Supplier of the Year” by WBENC.
To learn more about our products, or to place an order, please call (225) 272-6200 or send an email to email@example.com. For calls placed from outside of the United States, please call 001-225-272-6200.